Toyota land cruiser prado Owner's Manual page 339

3. Install the rubber cover as shown,
and fit it securely on the boss. Plug
in the connector.
Make sure the rubber cover fits securely
on the bulb base and the mounting body.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.
330
—Front fog lights
1. Turn the bulb base counterclockwise
to the front of the vehicle as shown.
2. Unplug the connector while depress-
ing the lock release.
If the connector is tight, wiggle it.