When connecting a jack handle extensions
and jack handle end, use a Phillips−head
screwdriver or jack handle to tighten the
bolts on the joints as shown in the il-
lustration.
When connecting the jack handle with ex-
tension, tighten the wing bolt on the joint
securely.
Make sure the hollow faces to the bolt on
any joint when you tighten the bolts.
NOTICE
Tighten all joints securely. Otherwise,
the extension may come off and it
may damage the paint or vehicle
body.
2. Open the back door.
3. Remove the access hole cover on the
rear bumper with a flat−blade screw-
driver.
277