Toyota land cruiser prado Owner's Manual page 186

1 2 3 4 5 6 (Preset buttons)
These buttons are used to preset and
tune in radio stations.
To preset a station to a button: Tune in
the desired station. (See
"SEEK/TRACK".) Push and hold down the
button until you hear a beep—this will set
the station to the button. The button num-
ber will appear on the display.
To recall a preset station: Push the button
for the station you want. The button num-
ber and station frequency will appear on
the display.
These systems can store one AM and two
FM stations for each button. (The display
will show "AM", "FM1" or "FM2" when you
push the "AM" or "FM" button.)
(Eject button)
Push this button to eject a cassette. Push
the compact disc eject button to eject a
compact disc.
(Program)
Push " " button to select the other
side of a cassette tape. The display indi-
cates which side is currently selected
"TUNE" or
(" " indicates the top side, "
cates the bottom side).
Auto−reverse feature: After the cassette
player reaches the end of a tape side, it
automatically reverses and begins to play
the other side. This is true whether the
cassette was playing or fast forwarding.
(Reverse/Fast−forward button)
Cassette player
Push " " button to fast−forward a cas-
sette tape. "FF" will appear on the display.
Push " " button to rewind a tape.
"REW" will appear on the display.
To stop the tape while it is fast−forward-
ing, push "
the tape while it is rewinding, push "
or "TAPE" button.
If a tape rewinds completely, the cassette
player will stop and then play that same
side. If a tape fast−forwards completely,
the cassette will play the other side of the
tape using the auto−reverse feature.
" indi-
" or "TAPE" button. To stop
"
Compact disc player
Push and hold " " button or "
ton to fast forward or reverse within a
compact disc. When you release the but-
ton, the compact disc player will resume
playing.
AM
Push the "AM" button to turn on the radio
and select the AM band. "AM" will appear
on the display.
AUDIO (Tone and sound balance adjust-
ment and on/off of the automatic sound
levelizer function)
By using the "AUDIO·TUNE" knob, you
can adjust the tone and sound balance
and turn on or off ASL (Automatic Sound
Levelizer) function. ASL function is de-
signed to adjust the volume automatically
according to the noise in the vehicle.
Each time you push the "AUDIO·TUNE"
knob, the mode changes. To adjust the
tone and balance and turn on or off the
ASL function, turn the knob.
BAS: Adjusts low−pitched tones. The dis-
play ranges from −5 to 5.
TRE: Adjusts high−pitched tones. The dis-
play ranges from −5 to 5.
" but-
177