Toyota land cruiser prado Owner's Manual page 187

Hide thumbs Also See for land cruiser prado:
Table of Contents

Advertisement

FAD: Adjusts the sound balance between
the front and rear speakers. The display
ranges from R7 to F7.
BAL: Adjusts the sound balance between
the right and left speakers. The display
ranges from L7 to R7.
ASL: To turn the ASL function on, turn the
knob clockwise. "ASL" will appear on the
display. To turn the function off, turn the
knob counterclockwise.
DISC (Compact disc)
Push the "DISC" button to play a compact
disc. Each time you push this button, the
system changes between the compact disc
player and the changer of separate unit if
it is equipped.
When the audio system is set into com-
pact disc operation, the display shows the
track, or track and disc number currently
being played.
178
Error messages
If the player malfunctions, your audio sys-
tem will display following error messages.
"WAIT": The compact disc player unit
may be too hot. Allow the player to cool
down.
"ERROR 1": The disc may be dirty, dam-
aged
or
inserted
incorrectly
down). Clean the disc and re−insert it.
"ERROR 3": There is a problem inside
the system. Eject the disc or magazine.
Set the disc or magazine again.
"ERROR
4":
Over−current.
Toyota dealer to inspect.
"CD OPEN": The compact disc changer
lid of separate unit is open. Close the
compact disc changer lid.
If the malfunction still exists, take your
vehicle to your Toyota dealer.
 DISC 
With compact disc changer only—
Use these buttons to select the disc you
want to listen to.
Push "" (preset button 3) or "" (preset
button 4) until the number of the disc you
want to listen appears on the display.
(up−side
Dolbyr
B NR*
If you are listening to a tape that was
recorded with Dolbyr B Noise Reduction,
push "
" (preset button 3). "
appear on the display. Push the button
Ask
your
again to turn off Dolbyr B NR.
The Dolby NR mode reduces tape noise
by about 10 dB. For best sound reproduc-
tion, play your tapes with this button on
or off according to the mode used for
recording the tape.
*: Dolby noise reduction manufactured under license from
Dolby Laboratories Licensing Corporation. "DOLBY" and the
double D symbol
Licensing Corporation.
FM
Push the "FM" button to turn on the radio
and select the FM band. "FM1" or "FM2"
will appear on the display.
" will
are trademarks of Dolby Laboratories

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents