Headlights And Turn Signals - Toyota land cruiser prado Owner's Manual

Headlights and turn signals

HEADLIGHTS
To turn on the following lights: Twist
the headlight/turn signal lever knob.
Position 1—Parking, tail, license plate and
instrument panel lights
On some models, the tail indicator light
(green light) on the instrument panel will
tell you that the tail lights are on.
Position 2—Headlights and all of the
above
The lights automatically turn off when the
driver's door is opened with the engine
switch turned off.
108
To turn on the lights again, turn the en-
gine switch to the "ON" position or actuate
the headlight switch. If you are going to
park for over one week, make sure the
headlight switch is off.
NOTICE
To prevent the battery from being dis-
charged, do not leave the lights on
for a long period when the engine is
not running.
High−Low beams—For high beams, turn
the headlights on and push the lever away
from you (position 1). Pull the lever to-
ward you (position 2) for low beams.
The headlight high beam indicator light
(blue light) on the instrument panel will
tell you that the high beams are on.
Flashing the high beam
(position 3)—Pull the lever all the way
back. The high beam headlights turn off
when you release the lever.
The high beam flasher works even when
the headlight switch is off.
headlights