3. Pull down the inner leg from the
back of the seat cushion. Swing the
whole seat down. Then, install the
seat lock cover.
4. Raise the seatback while pushing
down the seatback angle adjusting
lever.
CAUTION
When removing or reinstalling the
seat, observe the following to prevent
death or serious injury:
Do not fold or remove the seat
D
while the vehicle is moving.
Be careful not to get your hands or
D
feet pinched in the seat.
Be careful not to hit the removed
D
seat against a person or drop it on
yourself.
After folding or installing the seat,
D
push it forward and backward to
make sure it is locked in position.
To prevent death or serious injury in
a collision or sudden stop:
Do not sit on or place anything on
D
the folded seatback while driving.
Do not leave the removed seat
D
loose in the vehicle.
Do not try to sit on or place any-
D
thing on the removed seat.
When reinstalling the seat, be care-
D
ful not to hit the seat against you
or inside of the vehicle.
Install each seat in the same posi-
D
tion from which it was removed.
Failure to do so will prevent third
seat occupants from using seat
belts properly.
57