Side Doors - Toyota land cruiser prado Owner's Manual

3. Remove the 2 screws to take out the
lid of the module. Take out the dis-
charged battery and put in a new bat-
tery with the positive side up.
NOTICE
Do not bend the terminals.
4. Install the lid with the 2 screws.
5. Install the module into the key frame
and secure the cover with the screw.
6. When pushing either switch on the
wireless key, make sure the indicator
light comes on.
NOTICE
z Make sure the positive side and
negative side of the battery are
faced correctly.
z Do not replace the battery with wet
hands. Water may cause unexpected
rust.
z Do not touch or move any compo-
nents inside the transmitter, or it
may interfere with proper operation.
z Be careful not to bend the electrode
when inserting the battery and that
dust or oils do not adhere to the
case.
z Take care not to lose the screws.
z Close the cover securely.
After replacing the battery, check that the
key operates properly. If the key still does
not operate properly, contact your Toyota
dealer.

Side doors

LOCKING AND UNLOCKING WITH KEY
Insert the key into the keyhole and turn
it.
To lock: Turn the key forward.
To unlock: Turn the key backward.
All the side doors and back door lock or
unlock simultaneously with the driver's
door. When the interior light (center) and
personal light switches are in the "DOOR"
position, and all the side doors and back
door are unlocked simultaneously using
either the key or the wireless remote con-
trol, the interior light (center) and personal
lights will come on and remain on for
about 15 seconds before fading out.
19