Special use fibers [Thru-beam type (one pair set)]
Shape of fiber head
Type
(mm in)
Sensing width
32 mm
1.260 in
W5 H69 D20
W0.197 H2.717 D0.787
Sensing width
11 mm
0.433 in
W4.2 H31 D13.5
W0.165 H1.220 D0.531
Top sensing
W5 H15 D15
W0.197 H0.591 D0.591
Side sensing
W5 H15 D15
W0.197 H0.591 D0.591
Side-view
Side-view
W2 H1.5 D20
W0.079 H0.059 D0.787
"
"
Beam diameter:
0.125 mm
0.005 in
Sleeve part cannot be bent.
"
"
Beam diameter:
0.25 mm
0.010 in
Sleeve part cannot be bent.
Lens mountable
Notes: 1) Please take care that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. In addition, the
infrared type is easily affected by humidity, so contact our office if using these sensors in environments with high humidity or where humidity levels can
fluctuate.
Notes:
2) The minimum sensing object size is the value for red LED type. Please contact our office for information on the minimum sensing object size if using
amplifiers other than red LED type.
The optimum condition is the condition when the sensitivity is set so that the sensing output just changes to light incident operation in the object absent
condition.
Notes:
3) The fiber cable length practically limits the sensing range to 3,500 mm