Table of Contents
Advertisement
SPECIFICATIONS
Fibers
Type
Item
FT-E12/E22: R5 mm
Allowable bending radius
FD-E12: R10 mm
FD-E22/EN500S1/ENM1S1: R25 mm
FT-E12/E22, FD-E22:
Ambient temperature
FD-E12:
FD-EN500S1/ENM1S1: 20 to
Ambient humidity
Fiber core
Sheath
Fiber head
All fibers: 1 fiber attachment set
Accessories (Note 2)
Threaded head fibers: Nuts 2 pcs. and
toothed lock washer 1 pc.
Notes: 1) Sleeve part cannot be bent.
Notes:
2) The five types of attached fiber attachments (FX-AT2/AT3/AT4/AT5/AT6) described in this catalog are for use only with the FX-301/311 series. Refer to p.82 for details 'FIBER
OPTIONS'. Fiber attachment accessories are also supplied along with conventional amplifiers. Please contact our office for more details on these accessories.
Type
Item
Model No.
Allowable bending radius
Ambient temperature
Ambient humidity
Fiber core
Sheath
Fiber head
Accessories (Note 2)
Notes: 1) With the liquid sensing fiber, make sure that the temperature of the liquid is also within the ambient temperature range.
Notes:
2) The five types of attached fiber attachments (FX-AT2/AT3/AT4/AT5/AT6) described in this catalog are for use only with the FX-301/311 series. Refer to p.82 for details 'FIBER
OPTIONS'. Fiber attachment accessories are also supplied along with conventional amplifiers. Please contact our office for more details on these accessories.
Type
Item
350 °C
Allowable bending radius
(FT-H20W- : R10 mm
Ambient temperature
(Note 1, 2)
Ambient humidity
Fiber core
Sheath
Fiber head
FT-H20W- , FD-H18-L31 and FT-H13-FM2: 1 fiber attachment set
Accessories (Note 5)
Free-cut type fibers: FX-CT2 (fiber cutter) 1 pc.
Threaded head fibers: Nuts 2 pcs. (thru-beam type: 4 pcs.) and toothed lock washer 1 pc. (thru-beam type: 2 pcs.)
Notes: 1) If the fiber is used below
the allowable maximum temperature drops to
Notes:
2) The ambient temperature of heat-resistant 350 °C
condition. In humid environment, the ambient temperature differs. (For a high humidity of 85 %RH, the ambient temperature is 0 to
Notes:
3) If the fiber material is quartz glass or multi-component glass, keep it away from vibration or impact.
Notes:
4) The normal temperature for continuous usage or storage should be
Notes:
5) The five types of attached fiber attachments (FX-AT2/AT3/AT4/AT5/AT6) described in this catalog are for use only with the FX-301/311 series. Refer to p.82 for details 'FIBER
OPTIONS'. Fiber attachment accessories are also supplied along with conventional amplifiers. Please contact our office for more details on these accessories.
Ultra-small diameter
R0.197 in
or more (Note 1)
R0.394 in
or more (Note 1)
R0.984 in
or more (Note 1)
40 to
70 °C
40 to
158 °F
40 to
60 °C
40 to
140 °F
60 °C
4 to
140 °F
35 to 85 %RH (No dew condensation or icing allowed)
Polyolefin
Brass (Nickel plated)
[Sleeve: Stainless steel (SUS)]
FD-F8Y
Protective tube: R40 mm
R1.575 in
Fiber: R15 mm
R0.591 in
or more
40 to
125 °C
40 to
35 to 85 %RH (No dew condensation or icing allowed)
Polypropylene
(Protective tube: Fluorine resin)
1 fiber attachment set
FX-CT2 (fiber cutter) 1 pc.
Heat-resistant
662 °F
type 300°C
572°F
type 200°C
392°F
R25 mm
R0.984 in
R0.394 in
or more, Sleeve of a head with sleeve: R10 mm
60 to 350 °C
60 to 300 °C
60 to 200 °C
76 to 662 °F
76 to 572 °F
76 to 392 °F
(Note 1, 2, 3)
(Note 2)
35 to 85 %RH (No dew condensation or icing allowed)
Multi-component glass (Note 3)
Silicone
Inside stainless steel
(SUS) spiral tube
FD-H20-21:
Stainless steel (sus)
Stainless steel (SUS)
FT-H20W- :
Fluorine resin
Brass (Nickel plated)
FD-H20-21: Stai n l e ss steel (sus)
30 °C
22
°F, its maximum resistable temperature drops to
300 °C
572
°F. (The ambient temperature range of FX-SV1 is from
662 °F
type, 300 °C
Special use
Fixed-focus reflective
R10 mm
R0.394 in
or more
(FD-L43: R4 mm
R0.157 in
or more)
FD-L43: 0 to
70 °C
32 to
FD-L41/L42:
40 to
60 °C
40 to
FD-L4:
40 to
70 °C
40 to
Acrylic
Polyethylene (FD-L42: Vinyl chloride)
FD-L43/L41: Heat-resistant ABS
FD-L4: ABS
FD-L42: Aluminum (Black ALMITE)
(
Lens of FD-L43/L4: Acrylic
Front film of FD-L41: Polyester
All fibers: 1 fiber attachment set and
FX-CT2 (fiber cutter) 1 pc.
FD-L4: M2.6 (length 12 mm
screws with washers 2 pcs. and nuts 2 pcs.
Special use
Liquid level sensing
or more
257 °F
(Note 1)
Polycarbonate
1 fiber attachment set, FX-CT2 (fiber cutter) 1pc.
Tying bands 4 pcs., anti-slip tubes 2 pcs.
Environment resistant
Chemical-resistant
type 180°C
356°F
type 130°C
266°F
type
or more
R30 mm
R0.394 in
or more)
(FT-Z802Y: R25 mm
60 to 180 °C
60 to 130 °C
76 to 356 °F
76 to 266 °F
(Note 2, 4)
(FT-Z802Y: 0 to 60 °C
Silicone
Fluorine resin
Protective tube: Fluorine resin
Sheath: Polypropylene
(Sheath of FT-Z802Y: Fluorine resin)
Stainless steel (SUS) Brass (Nickel plated)
1 fiber attachment set
FX-CT2 (fiber cutter) 1 pc.
200° C
392
572 °F
type, 200 °C
392 °F
type and 180 °C
60 to
150 °C
76 to
08/2005
FX-301
Tough flexible
R10 mm
R0.394 in
158 °F
40 to
60 °C
40 to
140 °F
(FD-P81X:
40 to
70 °C
158 °F
Polyethylene [FT-P81X: Vinyl chloride,
Protective tube: Stainless steel (SUS)]
FT-P81X, FD-P81X: Brass (Nickel plated)
FD-G6X: Stainless steel (SUS)
)
All fibers: 1 fiber attachment set , nuts 2
pcs. (thru-beam type: 4 pcs.) and toothed
0.472
in)
lock washer 1 pc. (thru-beam type: 2 pcs.)
FD-G6X: FX-CT2 (fiber cutter) 1 pc.
FD-F4 /F9
R10 mm
R0.394 in
or more
40 to
100 °C
40 to
212 °F
Polyethylene
Polyetherimide
(Lens: Polycarbonate)
Vacuum
R1.181 in
or more
R200 mm
R0.984 in
or more)
(FT-60V: R30 mm
40 to
115 °C
40 to
40 to
239 °F
40 to
14 to 140
°F)
Acrylic
Quartz glass (Note 3)
Fluorine resin
Aluminum
Nuts 2 pcs. (thru-beam type: 4
pcs.) and toothed lock washer
1 pc. (thru-beam type: 2 pcs.)
°F. If the side-view lens FX-SV1 is put on the fiber head,
60 to
300 °C
76 to
356 °F
type fibers are the value in dry
40 °C
302 °F.
or more
140 °F
40 to
158 °F)
(Note 1)
R7.874 in
or more
R1.181 in
or more)
120 °C
248 °F
572
°F.)
14 to 104
°F.)
85
Advertisement
Table of Contents
