Panasonic Digital Fiber Sensor FX-301 Specification Sheet page 5

FX-301
ORDER GUIDE
Quick-connection cable is not supplied with the amplifier. Please order it separately.
Amplifiers
Type Appearance
Quick-connection cables
Type Model No.
CN-73-C1
Main cable CN-73-C2
CN-73-C5
CN-71-C1
Sub cable CN-71-C2
CN-71-C5
End plates are not supplied with the amplifier. Please order separately when the amplifiers are mounted in cascade.
End plates
Appearance
OPTIONS
Designation Model No.
Amplifier mounting
MS-DIN-2
bracket
Fiber amplifier
FX-MB1
protective seal
72
Model No. Emitting element
FX-301 Red LED
FX-301B Blue LED
FX-301G Green LED
FX-301H Infrared LED
FX-301P Red LED
FX-301BP Blue LED
FX-301GP Green LED
FX-301HP Infrared LED
Quick-connection cable is not supplied with the amplifier. Please order it separately.
Length: 1 m 3.281 ft
0.15 mm
Length: 2 m 6.562 ft
Cable outer diameter: "3.0 mm
Length: 5 m 16.404 ft
Length: 1 m 3.281 ft
0.15 mm
Length: 2 m 6.562 ft
Cable outer diameter: "3.0 mm
Length: 5 m 16.404 ft
Model No.
When cascading multiple amplifiers, or when it
moves depending on the way it is installed on a
DIN rail, these end plates ensure that all
MS-DIN-E
amplifiers are mounted together in a secure and
fully connected manner.
Two pcs. per set
Description
Mounting bracket for amplifier
10 sets of 2 communication window seals and 1 connector seal
Communication window seal:
It prevents malfunction due to transmission signal from another
amplifier, as well as, prevents effect on another amplifier.
Connector seal:
It prevents contact of any metal, etc., with the pins of the quick-
connection cable.
Output
NPN open-collector
transistor
PNP open-collector
transistor
Description
2
3-core cabtyre cable, with connector on one end
"0.118 in
2 1-core cabtyre cable, with connector on one end
"0.118 in
Description
08/2005
Main cable
CN-73-C
Sub cable
CN-71-C
Amplifier mounting bracket
MS-DIN-2
Fiber amplifier protective seal
FX-MB1