Table of Contents
Advertisement
FX-301
SPECIFICATIONS
Fibers
Type
Item
Allowable bending radius
R25 mm
Bending durability
(
Ambient temperature
Ambient humidity
Fiber core
Sheath
Fiber head
All fibers (except for FT-NB8/N8 and FD-N8/N4): 1 fiber attachment set
Free-cut type fibers (except for FT-NB8/N8 and FD-N8/N4): FX-CT2 (fiber cutter) 1 pc.
Accessories (Note 2)
Threaded head fibers: Nuts 2 pcs. (thru-beam type: 4 pcs.) and toothed lock washer
1 pc. (thru-beam type: 2 pcs.)
Notes: 1) Sleeve part of side-view fiber cannot be bent.
Notes:
2) The five types of attached fiber attachments (FX-AT2/AT3/AT4/AT5/AT6) described in this catalog are for use only with the FX-301/311 series. Refer to
p.82 for details 'FIBER OPTIONS'. Fiber attachment accessories are also supplied along with conventional amplifiers. Please contact our office for more
details on these accessories.
Type
Item
Allowable bending radius
Ambient temperature
Ambient humidity
Fiber core
Sheath
(
Fiber head
All fibers: 1 fiber attachment set and FX-CT2 (fiber cutter) 1 pc.
Threaded fibers: Nuts 2 pcs. (thru-beam type: 4 pcs.) and toothed lock washer 1 pc. (thru-beam type: 2 pcs.)
FT-WA30: 0.5
Accessories (Note)
FT-WA8: 0.5
FT-WZ8 : 1 set of mounting screw
FD-WKZ1: mounting bracket 1 pc.
Note: The five types of attached fiber attachments (FX-AT2/AT3/AT4/AT5/AT6) described in this catalog are for use only with the FX-301/311 series. Refer to p.82 for details 'FIBER
OPTIONS'. Fiber attachment accessories are also supplied along with conventional amplifiers. Please contact our office for more details on these accessories.
Type
Item
FT-A30/A8: R10 mm
Allowable bending radius
FD-A15: R25 mm
FT-A30, FD-A15: 40 to 60 °C
Ambient temperature
FT-A8: 40 to 70 °C
Ambient humidity
Fiber core
Sheath
(
Fiber head
Lens of FT-A30, FD-A15: Norbornene resin
Lens of FT-A8: Polyolefin
All fibers: 1 fiber attachment set and
FT-A30: 0.5 32 mm
Accessories (Note)
FT-A8: 0.5 12 mm
Note: The five types of attached fiber attachments (FX-AT2/AT3/AT4/AT5/AT6) described in this catalog are for use only with the FX-301/311 series. Refer to p.82 for details 'FIBER
OPTIONS'. Fiber attachment accessories are also supplied along with conventional amplifiers. Please contact our office for more details on these accessories.
84
Standard
R0.984 in
or more [Sleeve of a head with sleeve:R10 mm
40 to
70 °C
40 to
FT-SFM2SV2:
20 to
70 °C
4 to
FT-V22, FD-SFM2SV2:
20 to
60 °C
FT-V41, FD-V41, FT-V10:
40 to
35 to 85%RH (No dew condensation or icing allowed)
Polyethylene (FT-V22: Polyolefin)
Brass (Nickel plated)
FT-SFM2L/T80/SFM2/SNFM2/SFM2SV2/V22/V41,
FD-T80/T40/S80/SNFM2/SFM2SV2/V41 and Sleeve: Stainless steel (SUS)
FT-FM10L: ABS, Lens of FT-FM10L/SFM2L/V10: Acrylic
FT-V10: Stainless steel (SUS) and Polycarbonate
R1 mm
R0.039 in
or more (FD-WG4/WSG4: R2 mm
40 to
60 °C
40 to
35 to 85 %RH (No dew condensation or icing allowed)
FT-W8/W4, FD-W8/W44/WG4: Brass (Nickel plated)
Case of FT-WA30/WA8/WZ8 , Lens of FT-WS8L and Resin part of FT-WKV8: Polycarbonate, Lens of FT-WA30: Norbornene resin
Lens of FT-WA8: Polyolefin, Lens of FT-WZ8H/WZ8E, Reflector of FT-WZ8E and Prism of FT-WKV8: Acrylic,
Reflector of FT-WZ8: Polycarbonate, FD-WL41: Heat-resistant ABS, Front film of FD-WL41: Polyester,
FD-WL42: Aluminum (Black ALMITE), Lens of FD-WKZ1: Optical lens
32 mm
0.020
1.260 in
12 mm
0.020
0.472 in
Wide beam
R0.394 in
or more
R25 mm
R0.984 in
or more
40 to 140 °F
40 to 158 °F
35 to 85 %RH (No dew condensation or icing allowed)
Polycarbonate
)
Brass (Nickel plated)
FX-CT2 (fiber cutter) 1 pc.
0.020 1.260 in
seal type slit mask 2 pcs.
0.020 0.472 in
seal type slit mask 2 pcs. and
1
12 mm
0.039
0.472 in
seal type slit mask 2 pcs.
R0.394 in
or more (Note 1)]
1 million times or more (at R10 mm
158 °F
158 °F
)
(
4 to
140 °F
60 °C
40 to
140 °F
Acrylic
Vinyl chloride (FT-PS1: Polyethylene, FD-P2: Vinyl chloride and Polyurethane)
FT/FD-P80, FT-P60: Brass (Nickel plated)
Case of FT-Z8 : Polycarbonate
Lens of FT-Z8H/Z8E, Front film of FT-Z8: Polyester
All fibers: 1 fiber attachment set. (except for FT-P80 and FD-P80)
Free-cut type fibers: FX-CT2 (fiber cutter) 1 pc. (FT/FD-P80: FX-CT1 1 pc.)
Threaded head fibers: Nuts 2 pcs. (thru-beam type: 4 pcs.) and toothed lock
washer 1 pc. (thru-beam type: 2 pcs.), FT-Z8 : 1 set of mounting screw
Sharp bending
R0.079 in
or more, Sleeve of FD-W44: R10 mm
140 °F
(FT-WA30/WA8/WKV8:
Acrylic
Polyethylene
Stainless steel (SUS) (including sleeve)
seal type slit mask 2 pcs.
seal type slit mask 2 pcs. and 1
Special use
Array
R25 mm
R0.984 in
or more
(FT-KV1: R10 mm
40 to
70 °C
40 to
40 to
158 °F
40 to
Acrylic
Polyethylene
Stainless steel (SUS), Polycarbonate
(
Lens: Norbornene resin
Lens of FT-KV1: Polycarbonate, Prism of FT-KV8: Acrylic
All fibers: 1 fiber attachment set
Free-cut type fibers: FX-CT2 (fiber cutter) 1 pc.
Threaded head fibers: Nuts 2 pcs. and toothed lock washer 1 pc.
08/2005
Flexible
R4 mm
R0.157 in
or more
R0.394
in, FT-P40/P2 and FD-P40/P2: at R4 mm
40 to
70 °C
40 to
158 °F
FT-Z8 , FT-P60, FT-PS1, FD-P60, FD-P50:
40 to
60 °C
40 to
140 °F
Stainless steel (SUS)
R0.394 in
40 to
55 °C
40 to
131
12 mm
0.039
0.472 in
seal type slit mask 2 pcs.
Narrow beam
High precision
R0.984 in
or more
FD-EG2/EG3: R10 mm
R0.394 in
or more)
FD-G4/G6/EG1: R25 mm
20 to
60°C
60 °C
(
FD-G4: 40 to 70 °C
140 °F
FD-G6: 40 to 60 °C
Polyolefin (FD-G4/G6: Polyethylene)
Brass (Nickel plated)
)
[FD-G6: Stainless steel (SUS)]
R0.157
in)
)
or more)
°F)
)
R0.394 in
or more
R0.984 in
or more
4 to
140 °F
)
40 to 158 °F
40 to 140 °F
Advertisement
Table of Contents
