Notes: 1) Please take care that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut. In addition, the infrared
type is easily affected by humidity, so contact our office if using these sensors in environments with high humidity or where humidity levels can fluctuate.
Notes:
2) The minimum sensing object size is the value for red LED type. Please contact our office for information on the minimum sensing object size if using
amplifiers other than red LED type.
The optimum condition is the condition when the sensitivity is set so that the sensing output just changes to light incident operation in the object absent
condition.
Notes:
3) Sensing range for a 2 m
6.562 ft
Notes:
4) The fiber cutter is not supplied as an accessory with FT-NB8 and FT-N8. Please order it separately.
Sensing range (mm
in
) (Note 1)
Red LED
19,500
14,000
10,000
393.700
3,800
149.606
1,600
62.992
800
31.496
580
22.835
280
11.024
1,100
43.307
530
20.866
400
15.748
180
7.087
1,000
39.370
480
18.898
360
14.173
168
6.614
780
30.709
400
15.748
280
11.024
130
5.118
700
27.559
360
14.173
250
9.843
126
4.961
270
10.630
140
5.512
100
3.937
49
1.929
530
20.866
230
9.055
150
5.906
80
3.150
2,000
1,000
39.370
800
31.496
350
13.780
400
15.748
200
7.874
140
5.512
70
2.756
390
15.354
180
7.087
125
4.921
63
2.480
175
6.890
80
3.150
60
2.362
27
1.063
long fiber. A 10 m
32.808 ft
long fiber will cause damping of the beam and cannot be used.