Table of Contents
Advertisement
FX-301
DIMENSIONS (Unit: mm in)
FX-LE2
Super-expansion lens (Optional)
Material: Enclosure ......Stainless steel (SUS303)
Lens ..............Glass
FV-LE1
Expansion lens (For vacuum type fiber Optional)
Material: Enclosure ......Aluminum alloy (A6061-T6)
Lens ..............BK-7
FT-J6
Fiber at atmospheric side (For vacuum type fiber Optional)
Photo-terminal side
FX-MR2
Zoom lens (Optional)
Material: Enclosure ......Aluminum (Black ALMITE)
Lens ..............Glass
FX-MR5
Zoom lens (Optional)
Material: Enclosure ......PBT (Black)
Lens ..............Glass
NT-FX-MR5 (exclusive nut) is attached.
120
Material: Enclosure ......Brass (Nickel plated)
Mounting hole
Amplifier side
Notes: 1) In order to obtain a "0.3 mm
Notes:
Material: Enclosure ......Aluminum (Black ALMITE)
Notes: 1) In order to obtain a "0.1 mm
Notes:
08/2005
FX-SV1
Side-view lens (Optional)
Lens ..............Glass
FV-BR1
Photo-terminal (For vacuum type fiber Optional)
FX-MR1
Pinpoint spot lens (Optional)
Note: In order to obtain a "0.5 mm
Material: Enclosure ......Aluminum (Black ALMITE)
Lens ..............Glass
FX-MR3
Finest spot lens (Optional)
Mounting drawing with FD-EG1
Material: Enclosure ......Aluminum (Black ALMITE)
Material:
Lens ..............Glass
"0.012 in
in the above figure, to be 28.5 mm
2) When inserting the fiber, insert it fully till it stops.
FX-MR6
Finest spot lens (Optional)
Mounting drawing with FD-EG3
Lens ..............Acrylic
"0.004 in
in the above figure, to be 29.5 mm
2) When inserting the fiber, insert it fully till it stops.
Mounting drawing
with FD-G4
"0.02 in
spot, it is necessary to
keep '?', in the above figure,
within the specified range.
spot, it is necessary for ' # ',
1.122
in.
spot, it is necessary for ' # ',
1.161
in.
Advertisement
Table of Contents
