Access Panel - HP BL465c Gen8 Maintenance And Service Manual

Remove the server blade.
3.
Place the server blade on a flat, level work surface.
4.
WARNING:
internal system components to cool before touching them.
CAUTION:
before beginning any installation procedure. Improper grounding can cause ESD.

Access panel

To remove the component:
Power down the server blade (on page 22).
1.
Remove the server blade (on page 23).
2.
Press the access panel release button.
3.
Slide the access panel towards the rear of the server blade, and then lift to remove the panel.
4.
To replace the component:
Place the access panel on top of the server blade.
1.
Slide the access panel forward until it clicks into place.
2.
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To prevent damage to electrical components, properly ground the server blade
Removal and replacement procedures 24