HP BL465c Gen8 Maintenance And Service Manual page 53

If the processor has separated from the installation tool, carefully re-insert the processor in the tool.
4.
Handle the processor by the edges only, and do not touch the bottom of the processor, especially the
contact area.
The processor fits one way into the socket. Use the alignment guides on the processor and socket to
5.
properly align the processor with the socket. Install the processor on the spare system board. THE PINS
ON THE SYSTEM BOARD ARE VERY FRAGILE AND EASILY DAMAGED.
CAUTION: THE PINS ON THE SYSTEM BOARD ARE VERY FRAGILE AND EASILY DAMAGED. To
avoid damage to the system board:
Never install or remove a processor without using the processor installation tool.
•
• Do not touch the processor socket contacts.
Do not tilt or slide the processor when lowering the processor into the socket.
•
Removal and replacement procedures 53