System Maintenance Switch - HP BL465c Gen8 Maintenance And Service Manual

Item Description
Processor 2 DIMM slots
1
Processor 1 DIMM slots
2
Internal USB connector
3
Pass-thru board
4
TPM connector
5
Mezzanine connector 1 (Type A mezzanine only)
6
MicroSD card slot
7
Mezzanine connector 2 (Type A or type B mezzanine)
8
Enclosure connector
9

System maintenance switch

10
FlexibleLOM connectors (2)
11
Drive power cable connector
12
Processor socket 1 (populated)
13
Processor socket 2
14
System battery
15
HP c-Class Blade SUV cable connector
16
The symbols
HP ProLiant BL465c Gen8 Server Blade Installation Instructions on the HP website (http://www.hp.com/support).
System maintenance switch
Position
S1
S2
S3
S4
S5
S6
S7
S8
S9
S10
S11
S12
To access redundant ROM, set S1, S5, and S6 to on.
When the system maintenance switch position 6 is set to the On position, the system is prepared to erase all
system configuration settings from both CMOS and NVRAM.
correspond to the symbols located on the interconnect bays. For more information, see the
Default Function
Off Off = HP iLO security is enabled.
On = HP iLO security is disabled.
Off Off = System configuration can be
changed.
On = System configuration is locked.
Off Reserved
Off Reserved
Off Off = Power-on password is enabled.
On = Power-on password is disabled.
Off Off = No function
On = ROM reads system configuration
as invalid.
— Reserved
— Reserved
— Reserved
— Reserved
— Reserved
— Reserved
Component identification 72