To replace the component:
Install the DIMM baffle.
1.
Connect the drive cable connectors to the SAS controller.
2.
Install the access panel
3.
DIMMs
CAUTION:
To identify the DIMMs installed in the server blade, see "DIMM identification (on page 74)."
To remove the component:
Power down the server blade (on page 22).
1.
Remove the server blade (on page 23).
2.
("Access
panel" on page 24).
Use only HP DIMMs. DIMMs from other sources may adversely affect data integrity.
Removal and replacement procedures 28