HP BL465c Gen8 Maintenance And Service Manual page 33

Remove the server blade (on page 23).
2.
Remove the access panel
3.
Remove the mezzanine assembly
4.
Use the FlexibleLOM handle to remove the FlexibleLOM from the system board.
5.
To replace the component:
Align and install the FlexibleLOM. Press down on the handle to seat the FlexibleLOM on the system
1.
board.
Install the mezzanine assembly
2.
Install the access panel
3.
("Access panel" on page 24).
("Mezzanine assembly" on page 29).
("Mezzanine assembly" on page 29).
("Access panel" on page 24).
Removal and replacement procedures 33