HP BL465c Gen8 Maintenance And Service Manual page 46

CAUTION: To avoid damage to the processor, do not touch the bottom of the processor,
especially the contact area.
To replace the component:
IMPORTANT:
If the processor has separated from the installation tool, carefully re-insert the processor in the tool.
1.
Handle the processor by the edges only, and do not touch the bottom of the processor, especially the
contact area.
The processor fits one way into the socket. Use the alignment guides on the processor and socket to
2.
properly align the processor with the socket. Install the spare processor. THE PINS ON THE SYSTEM
BOARD ARE VERY FRAGILE AND EASILY DAMAGED.
Be sure the processor remains inside the processor installation tool.
Removal and replacement procedures 46