Sas Controller - HP BL465c Gen8 Maintenance And Service Manual

SAS controller

To remove the component:
Power down the server blade (on page 22).
1.
Remove the server blade (on page 23).
2.
Remove the access panel
3.
CAUTION:
DIMM baffle. Failure to do so may result in damage to the SAS controller.
Disconnect the drive cables from the SAS controller and remove the DIMM baffle
4.
page 27).
Disconnect the capacitor pack cabling, if connected
5.
Remove the SAS controller.
6.
("Access panel" on page 24).
Always disconnect the drive cables from the SAS controller before removing the
("Capacitor pack cabling" on page 64).
Removal and replacement procedures 34
("DIMM baffle" on