Konica Minolta bizhub C550 User Manual page 675

Utility mode
Parameter
Gradation
Adjustment
Line Detec-
tion
Trail Edge Adjust
*1
Appears when Finisher FS-608 is installed.
*2
Appears when finisher is installed with punch kit.
*3
Appears when Z folding unit is installed.
*4
Appears when post inserter is installed.
C550
Description
Image Stabiliza- When adjusting the gradation levels, first
tion Only press the [Start] key to perform image sta-
bilization.
Copy Adjust the gradation levels if there are
changes in the color gradations of the print
image. The adjustment is made with stress
on increasing the number of images stored
in the memory.
Printer (Grada- Adjust the gradation levels if there are
tion) changes in the color gradations of the print
image. The adjustment is made with stress
on the gradations in images.
Printer (Resolu- Adjust the gradation levels if there are
tion) changes in the color gradations of the print
image. The adjustment is made with stress
on the reproducibility of text and lines.
Prior Detection Select whether or not a warning appears
Setting when the left partition glass is dirty, and
specify the dirt detection level. The dirt de-
tection operation is performed before and
after scanning a document using the ADF.
Detection While Specify the level at which dirt is detected
Feeding Setting when scanning a document using the ADF.
• Do not remove:
The operation to remove lines is not
performed.
• Remove:
The operation to remove lines is per-
formed.
Adjust shifting if it can be seen at the trail-
ing edge of the print result.
11
Default Setting
-
-
-
-
Yes
Warning Display:
TYPE 2
Detection Level: Std.
1
-
11-36