Konica Minolta bizhub C550 User Manual page 403

Copy paper/original documents
3
Touch [Change Tray Settings].
4
Touch [Custom Size].
The Custom Size screen appears.
5
Specify the X and Y sides of the paper, and then touch [Store].
– Make sure that [X] is selected, and then use the keypad to type in
the length of side X (between 139.7 mm and 457.2 mm).
– Touch [Y] to select it, and then use the keypad to type in the length
of side Y (between 90.0 mm and 311.1 mm).
– Check the illustration in the screen for the sides that are considered
X and Y.
– If a value outside the allowable range is specified, the message "In-
put error" appears. Type a value within the allowable range.
– If the value was incorrectly entered, press the [C] (clear) key in the
keypad to erase the value, and then specify the correct value.
To cancel changes to the settings, touch [Cancel].
C550
6
6-16