Konica Minolta bizhub C550 User Manual page 750

Utility mode
– To stop all jobs when the limit specified with user authentication or
account track is reached, touch [Stop Job].
11
Specify a setting for "Number of User Counters Assigned".
– Press the [C] (clear) key to erase the value, and then use the keypad
to specify the desired value (between 1 and 999).
– If user authentication and account track settings have been
applied, counters can be assigned to both accounts and users, and
counts for both can be totaled.
12
Specify "Ticket Hold Time Setting".
– Use the keypad to type in the time. (1 to 60 minutes)
– Specify the holding time of kerberos authentication ticket. The
holding time setting is applied when Active Directory is selected as
the authentication server type.
13
Touch [OK].
– If the setting for "User Authentication", "Account Track" or
"Number of User Counters Assighed" was changed, the message
"Are you sure you want to clear all data?" appears.
14
Touch [Yes], and then touch [OK].
– To stop clearing the usage data without changing the settings,
touch [No].
– If the setting for any of the following is changed, the data is not
cleared.
"Public User Access", "When # of Jobs Reach Maximum",
"Synchronize User Authentication & Account Track" or "Ticket Hold
Time Setting"
– To cancel the setting and select the default, press the [Reset] key.
C550
11
11-111