Additional copy operations
4
Press the [Check Program Settings] key.
The Check Job Settings screen appears.
5
Check the copy settings registered with the selected copy program.
–
The copy settings cannot be changed from the Check Job Settings
screens.
–
There are six Check Job Settings screens. The number to the right
of the screen title indicates the number of the currently displayed
screen.
–
To display the previous screen, touch [←Back]. To display the next
screen, touch [Forward→].
6
Touch [Close].
The Recall Copy Program screen appears again.
7
Again touch the button for the copy program registered with the copy
settings to be recalled.
–
If [OK] is touched with no copy program selected, the Basic screen
appears again without a copy program being recalled.
C550
3
3-26