Utility mode
Punch Regist Loop Size Adjustment
When printing with a Punch setting, the angle of punched holes along the
side of the paper can be adjusted.
Note
[Punch Regist Loop Size Adjustment] appears only if optional punch kit
is installed on the finisher.
For details on the Punch settings, refer to "Punching holes in copies
(Punch settings)" on page 2-89.
0 Before making any adjustments, use a Punch setting to print a sample
copy. Perform the adjustment while checking the sample that was
created.
1
Display the Administrator Settings screen.
–
For details on displaying the Administrator Setting screen, refer to
"Displaying the Administrator Settings screen" on page 11-51.
2
Touch [1 System Settings].
The System Settings screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [3 Finisher Adjustment].
The Finisher Adjustment screen appears.
5
Touch [7 Punch Regist Loop Size Adjustment].
C550
11
11-81