What To Do If - AEG COMPETENCE 2040B Instruction Book

Faults you
can rectify
yourself
18
What to do if ... (something goes wrong?)
.. the pilot lamps do not show?
.» the oven does not heat?
1. Ali the relevant switches may not have been operated.
. The fuse in the fuse box hay have blown.
. IMPORTANT - Make sure that the oven door is closed
completely.
om
. the fuses keep blowing?
Please cail an approved and qualified electrician. 4
-» the oven lamp fails?
See cleaning dnd care on page 13.
Replacement lamps are not covered by warranty and are
not. free of charge.
~. the oven cannot be switched on?
Check whether the symbol Πis flashing. If it is, press button
or |). Select the correct time of day if necessary.
Please make sure that you are not able to rectify a fault
yourself before calling a service engineer in connection
with any of these problems. The cost of calling out an engi-
neer will not be covered by the warranty.
Therefore, be sure to follow very carefully the instructions
in this booklet and any additional information which may
accompany this appliance.
AEG electrical appliances comply with current safety reg-
ulations. Repairs should only be carried out by a qualified
AEG engineer or AEG appointed service agents. Repalrs
carried out by unauthorised personnel could lead to dam-
age and could pose a considerable safety hazard to the
user.
WTWS00-1 0294 UK - WTW901-1 (2/84 UK - WTW906 02/94 UK — WTW903-1 0294 UK