Message Waiting Indicator - Aastra 6735i User Manual

Message Waiting Indicator

You can configure the Message Waiting Indicator (MWI) to illuminate for a specific line or for all lines. For example, if you
configure the MWI LED on line 3 only, the LED illuminates if a voice mail is pending on line 3. If you configure the MWI LED
for all lines, the LED illuminates if a voice mail is pending on any line on the phone (lines 1 through 9).
You configure the MWI indicator using the Aastra Web UI.
Configuring Message Waiting Indicator
Aastra Web UI
Use the following procedure to configure the message waiting indicator on a specific line or on all lines on the IP phone.
Note:
"Message Waiting Indicator Line" parameter is set to ALL lines by default.
1. Click on Basic Settings->Preferences->General.
2. The "Message Waiting Indicator Line" field is set to ALL lines by default. If required, change the setting to a specific
line by selecting a line from the list. Valid values are All and lines 1 through 9.
3. Click Save Settings.
41-001451-00 REV00 – 07.2011
Additional Features
180