Modbus Addresses Of Other Modules - JUMO mTRON T Manual

7 Modbus address tables
7.3

Modbus addresses of other modules

If the central processing unit detects other modules, they can be accessed using the following
addresses depending on the module type.
The additional modules are available for configuration under virtual Modbus device addresses
(1 to 254) as with the setup program under P
7.3.1 Modbus addresses for each HMI module
Process values based on a HMI module
Address
Hex. Dec.
0x0002 5
0x0006 9
0x0011 17
0x0013 19
0x... ...
0x007B 123
Process values of a HMI module for the basis
Address
Hex. Dec.
0x008C 140
0x009D 157
0x009F 159
0x... ...
0x00D1 209
0x00D3 211
0x00D5 213
0x... ...
0x0107 263
94
Data type/ Access Signal designation
bit number
Bit field 64 R/O
Bit field 64 R/O
Float R/O
Float R/O
Float R/O
Float R/O
Data type/ Access Signal designation
bit number
Bit field 64 R/O
Float R/O
Float R/O
Float R/O
Float R/O
Float R/O
Float R/O
Float R/O
Float R/O
> H
ROJECT
Bit 0 to 53 = 0x3FFFFFFFFFFFFF : binary spur 1 to 54
Bit 0 to 8 = 0x1FF : batch start 1 to 9
Analog spur 1
Analog spur 2
Analog spur ...
Analog spur 54
Bit 0 to 8 = 0x1FF: collective alarm for batch 1 to 9
Bit 9 = 0x200: collective alarm of recording function
Bit 10 = 0x400: fault with recording function
Bit 11 to 19= 0xFF800: active batch 1 to 9
Current value of counter 1
(current value of the counter or integrator)
Current value of counter 2
Current value of counter ...
Current value of counter 27
Last value of counter 1
(value of the counter or integrator during the last recording period)
Last value of counter 2
Last value of counter ...
Last value of counter 27
ARDWARE ARRANGEMENT
.