JUMO mTRON T Manual page 72

6 User frames
Parameter
Factor
6.3.2 Modbus frames for writing
This function is used to compile up to eight Modbus frames for writing process values to exter-
nal devices (via interface) individually for each opposite side. The process values (analog, in-
teger, and digital signals, and text) are written to the frames by the system and are available to
external devices.
Each frame can be used to configure up to 64 entries (process values), which are then grouped
and transferred in a Modbus telegram.
Setup dialog
Parameter
Parameter
Comment
72
Selection/settings
Using the factor makes it possible to transmit floating point values in the integer
format. The transmitter multiplies the data with the corresponding factor before
transmission. The data mut be divided by the same value in the receiver.
Complete float range allowed, default
value = 1.0
Selection/settings
Frame 1
Use default text or edit text.
Description
This factor is used to rescale values dur-
ing the transmission, in particular, with
the same type conversions.
(This parameter is not active with the
"text" data type.)
Description
Comment on the more detailed descrip-
tion of the frame