JUMO mTRON T Manual page 89

PLC digital outputs
The meaning of PLC digital outputs (18 blocks each with 32 outputs) is determined by the PLC
program. They are named in the setup program under CPU > S
PUT TEXTS
PLC digital outputs (name provided at factory)
Address
Hex. Dec.
0x1B41 6977
.
Data type/ Access Signal designation
bit number
Bit field 32 R/O
Bit 0 R/O
Bit 1 R/O
Bit 2 R/O
Bit 3 R/O
Bit 4 R/O
Bit 5 R/O
Bit 6 R/O
Bit 7 R/O
Bit 8 R/O
Bit 9 R/O
Bit 10 R/O
Bit 11 R/O
Bit 12 R/O
Bit 13 R/O
Bit 14 R/O
Bit 15 R/O
Bit 16 R/O
Bit 17 R/O
Bit 18 R/O
Bit 19 R/O
Bit 20 R/O
Bit 21 R/O
Bit 22 R/O
Bit 23 R/O
Bit 24 R/O
Bit 25 R/O
7 Modbus address tables
Block 1 digital outputs; intended for operating contacts, status, and
tolerance band signals of program generator 1
Digital output 1, (operating contact 1)
Digital output 2, (operating contact 2)
Digital output 3, (operating contact 3)
Digital output 4, (operating contact 4)
Digital output 5, (operating contact 5)
Digital output 6, (operating contact 6)
Digital output 7, (operating contact 7)
Digital output 8, (operating contact 8)
Digital output 9, (operating contact 9)
Digital output 10, (operating contact 10)
Digital output 11, (operating contact 11)
Digital output 12, (operating contact 12)
Digital output 13, (operating contact 13)
Digital output 14, (operating contact 14)
Digital output 15, (operating contact 15)
Digital output 16, (operating contact 16)
Digital output 17 (basic setting)
Digital output 18, (generator status: "Automatic" operating mode)
Digital output 19, (generator status: "Extended automatic" operat-
ing mode)
Digital output 20, (generator status: "Standstill" operating mode)
Digital output 21, (generator status: "Delay" operating mode)
Digital output 22, (generator status: "Program end" operating
mode)
Digital output 23, (generator status: "Manual mode" operating
mode)
Digital output 24, (tol.range channel 1)
Digital output 25, (tol.range channel 2)
Digital output 26, (tol.range channel 3)
> D
ETUP ONLY IGITAL
PLC -
OUT
89