JUMO mTRON T Manual page 19

Parameters
Parameter
Initialization
Phone no.
User (Internet)
Password (Inter-
net)
2.3.2 Handshake lines for RS232
When using Com1/Com2 as a RS232 interface, the handshake lines (RTS, CTS) are not used.
The RTS line coming from the master is ignored. The response is immediately transmitted from
the slave. The CTS line of the master remains open.
If the program used evaluates the handshake lines, they must be bridged in the cable.
Connecting a PC/Notebook with 9-pin Sub-D socket to Com1/Com2
Com1/Com2
Selection/settings
AT Q0 S95=249 L1 M1 S7=60 S30=9
\N3 ?
(ASCII; max. 50 characters)
010880192658
(ASCII; max. 24 characters)
MSN
(ASCII; max. 64 characters)
MSN
(ASCII; max. 64 characters)
(2) RxD
(3) TxD
(5) GND
2 Connecting interfaces
Description
AT command for modem changeover
This default initialization string switches
the modem to the mode for connecting
to the Internet (e-mail server).
Telephone number for connecting to the
Internet (to be requested from the Inter-
net provider)
User name for logon when connecting to
the Internet (to be requested from the
Internet provider)
Password for logon when connecting to
the Internet (to be requested from the
Internet provider)
(2)
RxD
(3)
TxD
(5)
GND
(7)
RTS
(8)
CTS
PC/Notebook
19