Mounting; Figure 2-3 Mounting Dimensions (Not To Scale) - Honeywell UDC2300 Product Manual

2.5 Mounting

Physical Considerations
The controller can be mounted on either a vertical or tilted panel using the mounting kit
supplied. Adequate access space must be available at the back of the panel for installation
and servicing activities.
• Overall dimensions and panel cutout requirements for mounting the controller are
shown in Figure 2-3.
• The controller's mounting enclosure must be grounded according to CSA standard
C22.2 No. 0.4 or Factory Mutual Class No. 3820 paragraph 6.1.5.
• The front panel is moisture rated NEMA 3/IP65 (IEC) when properly installed with
panel gasket.
Overall Dimensions
96
3.780
21.0
.826

Figure 2-3 Mounting Dimensions (not to scale)

1/01
96
3.780
Max Panel
24 10
Thickness
.945
.394
105.4
4.19
UDC2300 Limit Controller Product Manual
+0.8
+0.008
90 =0.0 92
-0.0
+0.03
3.5906 3.622 +0.031
-0.0
Panel Cutout
2.62
Max (2)
.103
90.7
3.57
Installation
+0.008
92 -0.0
+0.031
3.622
-0.0
with optional
rear cover
Dimensions:
Millimeters
Inches
20751
9