Configuration; Overview - Honeywell UDC2300 Product Manual

4.1 Overview

Introduction
Configuration is a dedicated operation where you use straightforward keystroke
sequences to select and establish (configure) pertinent control data best suited for your
application.
To assist you in the configuration process, there are prompts that appear in the upper and
lower displays. These prompts let you know what group of configuration data (Set Up
prompts) you are working with and also, the specific parameters (Function prompts)
associated with each group.
Figure 3-1 shows you an overview of the prompt hierarchy as they appear in the
controller.
As you will see, the configuration data is divided into 5 main Set Up groups plus prompts
for calibration and prompts that show the status of the continuous background tests that
are being performed
What's in this section?
The following topics are covered in this section.
4.1 Overview
4.2 Configuration Prompt Hierarchy
4.3 Configuration Procedure
4.4 Lockout Group
4.5 Limit Group
4.6 Input 1 Set Up Group
4.7 Options Set Up Group
4.8 Communications Set Up Group
4.9 Alarms Set Up Group
4.10 Configuration Record Sheet
1/01

4 Configuration

TOPIC
UDC2300 Limit Controller Product Manual
Configuration
See Page
21
22
23
24
25
26
28
29
31
33
21