Printing Area - Roland SJ-740 User Manual

7-3 Printing Area

The media's printable width (the direction of printing carriage movement) is determined by the width of the loaded
media. When the [SETUP] key is pressed after loading the media, the width of the media is detected and the printing area
appears on the display. The printing area is normally 10 mm (3/8 in.) inward from the respective left- and right-hand
edges of the media.
When the printable width have been specified with the [PRINT AREA] menu, the margins are in accordance with these
setting values.
Length of media
Printing width
10 mm
You can use the [PRINT AREA] menu to specify
the width of the printing area.
90 mm
Media
Printing area
Origin point (0,0)
96.5 mm
10 mm
Chapter 7 - Appendix
97