When Loading Thick Media - Roland SJ-740 User Manual

2-2 Loading Media

When Loading Thick Media

Media that is thick or that warps easily may lead to problems with media feed or jamming. When you are using such
media, adjust the height of the printing heads.
When the height of the printing head has been adjusted, it is necessary to perform bidirectional correction. For more informa-
tion about bidirectional correction, see "3-6 Making Corrections for Printing -- Bidirectional Correction."
For more information about the thicknesses of media that you can load, see "7-2 Media Conditions."
Adjusting the Head Height
The head height is setting at position 2 (middle) when shipped from the factory.
Open the front cover.
1
Press the [MENU] key, and press the [
2
to display the screen shown in the figure.
Press the [
3
in the figure.
When the screen shown in the figure appears, the car-
riage simultaneously moves to the left.
Move the lever to adjust the height of the head.
4
When you move the lever, the machine beeps and the
screen display changes.
- When the lever is moved to position 1 (low): One beep
- When the lever is moved to position 2 (middle): Two beeps
- When the lever is moved to position 3 (high): Three beeps
Move the lever until it stops. If it is not at position
1, position 2 or position 3, bidirectional printing
may be misaligned.
Close the front cover.
5
The printing carriage return to the standby position.
38
Chapter 2 - Basic Operation
] key to display the screen shown
] key
MENU
HEAD HEIGHT
HEAD HEIGHT
HIGH MIDDLE
Setting after Present setting
changed displayed displayed
3
2
1
3 (high) : When media
that is thick or prone to
warping is loaded
2 (middle) : Standard
1 (low) : Suitable for
high image quality