Specifying A Location In The Feed Direction - Roland SJ-740 User Manual

Specifying a Location in the Feed Direction

Use the [ ] [ ] keys to move the media to the location where you want to start printing.
In the figure, the next printing operation starts from the location shown.
The next printing operation starts here.
Front edge of the media
Whenever possible, avoid using the [
• The pinch rollers may pass over the printed surface and smudge the ink.
• The grit rollers may leave tracks on the media, reducing printing accuracy.
• Printing may sag.
For roll media, when the media has been returned toward the back of the unit with the [
onto the roll so that all of the media at the back of the unit is stretched taut.
3-3 Setting the Location Where Printing Starts
Knife guide
Print-start line
] key to pull back the media. Otherwise the following may occur.
Chapter 3 - A Wide Variety of Operations
] key, manually roll the media back
49