Printer Settings; Accessing The Startup Page - Xerox Phaser 4500 Reference Manual

Printer Settings

This topic includes:
■ "Accessing the Startup Page" on page 1-13
"Accessing Power Saver" on page 1-14
■
■ "File Security System" on page 1-15
■ "Selecting Tray Settings" on page 1-16
"Adjusting Front Panel Brightness" on page 1-17
■
■ "Adjusting Front Panel Contrast" on page 1-18
■ "Changing Printer Language" on page 1-18

Accessing the Startup Page

The printer automatically produces a "Startup Page" each time the printer is turned on or reset.
You can turn off the automatic printing of the "Startup Page" and later print it from the
information pages menu.
To turn on/off the "Startup Page" use either:
■ The printer's front panel
■ CentreWare IS
Using the Printer's Front Panel
To turn on/off the Startup Page:
1. Select Printer Setup, then press the OK button.
2. Select Printer Controls, then press the OK button.
The Startup Page
3.
Press the OK button to change the setting.
Using CentreWare IS
To turn on/off the automatic printing of the "Startup Page":
1. Launch your web browser.
2. Enter your printer's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx).
3. Select Properties.
4. Select the General folder on the left sidebar.
5. Select Printer Defaults.
6. Select Off or On from the Printer Startup Page drop-down list to change the setting.
7. Click Save Changes at the bottom of the page.
Copyright © 2004 Xerox Corporation. All Rights Reserved.
is highlighted. The end of the line displays the setting
1-13
Phaser™ 4500 Laser Printer
(On or Off).