Fax
Fax
Using the automatic document feeder and scanner glass
Automatic document feeder (ADF)
•
Use the ADF for multiple‑page or two-sided
documents.
•
Load an original document faceup. For multiple‑page
documents, make sure to align the leading edge
before loading.
•
Make sure to adjust the ADF guides to match the width
of the paper that you are loading.
Sending a fax
Note: Make sure that fax is configured. For more information, see the
Using the control panel
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, touch Fax, and then enter the needed information.
If necessary, adjust the settings.
3
Send the fax.
Using the computer
Before you begin, make sure that the fax driver is installed. For more information, see
on page
52.
For Windows users
1
From the document that you are trying to fax, open the Print dialog.
2
Select the printer, and then click Properties, Preferences, Options, or Setup.
3
Click Fax > Enable fax > Always display settings prior to faxing, and then enter the recipient number.
If necessary, configure other fax settings.
4
Send the fax.
Scanner glass
•
Use the scanner glass for single‑page documents,
book pages, small items (such as postcards or
photos), transparencies, photo paper, or thin media
(such as magazine clippings).
•
Place the document facedown in the corner with the
arrow.
Setting up the printer to fax
108
section.
"Installing the fax driver"