Printer Setting Tool For Mac; Before Using The Printer Setting Tool; Using The Printer Setting Tool For Mac - Brother PT-P950NW User Manual

Changing the P-touch Label Printer Settings

Printer Setting Tool for Mac

Using the Printer Setting Tool, you can specify the printer's communication settings and device settings from
a Mac. Not only can you change the device settings for one printer, but you can also apply the same settings
to multiple printers.
Note
The Printer Setting Tool is installed automatically when you use the initial installer to install the printer
driver. For more information, see Installing the Printer Driver and Software on page 8.
Important
The Printer Setting Tool is available only with compatible Brother printers.

Before Using the Printer Setting Tool

 Make sure the AC adapter is connected to the printer and to an AC power outlet, or a fully-charged battery
is installed.
 Make sure the printer driver has been installed correctly and you can print.
 Connect this P-touch Label Printer to a computer with a USB cable. Settings cannot be specified using
Wi-Fi using this tool.

Using the Printer Setting Tool for Mac

a
Connect the P-touch Label Printer you want to configure to the computer.
b
Click [Macintosh HD] - [Applications] - [Brother] - [Printer Setting Tool] - [Printer Setting Tool.app].
The [Printer Setting Tool] window appears.
c
Check that the P-touch Label Printer you want to configure appears next to [Printer]. If a different printer
appears, select the P-touch Label Printer you want from the drop-down list.
Note
If only one P-touch Label Printer is connected, it is unnecessary to make a selection because only that
P-touch Label Printer will appear.
d
Select a setting tab, and then specify or change the settings.
e
Click [Apply Settings to the Printer] in the setting tab to apply the settings to the P-touch Label Printer.
f
Click [Exit] to finish specifying settings.
Important
Use the Printer Setting Tool to configure the P-touch Label Printer only when the P-touch Label Printer is
in standby. The P-touch Label Printer may malfunction if you try to configure it while it is handling a job.
5
5
5
5
58