Brother PT-P710BT User Manual
  1. Manuals
  2. Brands
  3. Brother Manuals
  4. Label Maker
  5. PT-P710BT
  6. User manual

Brother PT-P710BT User Manual

Hide thumbs Also See for PT-P710BT:
Table of Contents

Advertisement

Quick Links

PT-P710BT
Please read this guide, including all Precautions, before using this label printer. After reading this guide, keep it in
a safe place.
For FAQs, Troubleshooting, and to download the label printer's software and manuals, visit support.brother.com.
Supplies
Brother TZe Tape Cassette
Compatible widths
Head Cleaning Tape Cassette
Rechargeable Li-ion Battery
• Brother reserves the right to make changes without notice in the specifications and materials contained herein
and shall not be responsible for any damages (including consequential) caused by reliance on the materials
presented, including but not limited to typographical and other errors relating to the publications.
• Unauthorized duplication or reproduction of any or all content of this document is prohibited.
• Please note that we cannot assume any responsibility for any damage or lost profit arising from the use of the
label created with this label printer or the disappearance or change of data due to failure, repair or consumables
using battery, or any claim from a third party.
0.13, 0.23, 0.35, 0.47, 0.70, 0.94 in.
3.5, 6, 9, 12, 18, 24 mm
TZeCL4
PA-BT-005
Version 01
User's Guide (English)
C1

Advertisement

Table of Contents
loading

Related Manuals for Brother PT-P710BT

Summary of Contents for Brother PT-P710BT

  • Page 1 Rechargeable Li-ion Battery PA-BT-005 • Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited to typographical and other errors relating to the publications.

  • Page 2: Table Of Contents

    Table of Contents Precautions Safety Precautions ..........................1 General Precautions .......................... 2 Set Up Your Label Printer Parts Description ..........................3 Insert the Tape Cassette ........................4 Charge the Battery ..........................5 Remove Battery for Replacement or Disposal ................6 Turn Power On or Off ........................

  • Page 3: Precautions

    Precautions Safety Precautions Follow these guidelines to avoid the risk of heat generation, smoking, explosion, fire, or injury. DANGER Failure to observe instructions and warnings will result in death or serious injuries. Rechargeable Li-ion Battery • Do not allow the battery to come into contact with liquids. •...

  • Page 4: General Precautions

    Label Printer, Tape Cassette, or USB Cable • Do not use in any way or for any purpose not described in this guide. Doing so may result in accidents or damage. • Use Brother Tape Cassettes. • Do not put any foreign objects into the Tape Exit Slot, the USB Port, battery compartment, etc.

  • Page 5: Set Up Your Label Printer

    Set Up Your Label Printer Parts Description Power LED Tape Exit Slot Power Button Battery LED USB Port Cassette Cover Tape Guide End of Tape...

  • Page 6: Insert The Tape Cassette

    Set Up Your Label Printer Insert the Tape Cassette Place your fingers on the Tape Exit Slot. Open the Cassette Cover by pulling the Tape Exit Slot to the left. Pull out the protective sheet (first time only). Confirm that the tape is pointed at the Tape Exit Slot and gently press the Tape Cassette into the label printer until it locks into place.

  • Page 7: Charge The Battery

    Set Up Your Label Printer Charge the Battery USB Port  USB AC Adapter (on computer) (not included) 5 V DC, 0.5 A – 2 A 5 V DC, 0.5 A – 2 A Connect the label printer to the computer using the included USB cable, or connect the USB cable to a USB AC Adapter suitable for charging mobile devices, and plug the adapter into a power source.

  • Page 8: Remove Battery For Replacement Or Disposal

    Set Up Your Label Printer Remove Battery for Replacement or Disposal Turn the label printer off. Open the Cassette Cover. Remove the two screws from the Battery Cover using a flat-bladed screwdriver. Remove the battery. • Dispose of batteries at an appropriate collection point.

  • Page 9: Turn Power On Or Off

    Set Up Your Label Printer Turn Power On or Off Power On Press the Power Button. Power Off Press and hold the Power Button until the Power LED turns off.

  • Page 10: Print From Your Mobile Device

    Print from Your Mobile Device Download the P-touch apps from the App Store or Google Play™. iPrint&Label Create labels for business use, including barcodes, office equipment labels, and labels for folder tabs. P-touch Design&Print Design and create stylish labels for work or home. •...

  • Page 11: Pair The Label Printer With Your Mobile Device

    Go to the settings menu and make sure the Bluetooth option is on. Select PT-P710BT**** (where **** is the last four digits of your label printer’s serial number. The unit's serial number is located inside the Cassette Cover, underneath the TZe Tape Cassette.).

  • Page 12: Print From Your Computer

    Print from Your Computer Visit install.brother and install the printer driver and P-touch Editor by following the on-screen instructions. The following software can be selected Features for installation: Printer Driver Software required to print from a label printer. Label creation software for computers. This application comes with...

  • Page 13: Windows

    Print from Your Computer Windows Create Labels with P-touch Editor Connect the label printer and your computer with the included USB cable. Double-click the P-touch Editor icon on the desktop. Create a new layout or open an existing layout. Select the mode as necessary: Print Settings Mode Features...

  • Page 14: Configure Settings Using The Printer Setting Tool

    Start the Printer Setting Tool. Operating System How to Start Version Windows 7 Start > All Programs > Brother > Label & Mobile Printer > Printer Setting Tool Windows 8 Apps > Printer Setting Tool Windows 8.1 Windows 10 Start > Brother > Printer Setting Tool Click Device Settings.

  • Page 15: Apply Settings Changes To Multiple Label Printers

    Select the Language, select the check boxes next to the firmware you want to update to, and then click Transfer. Click Start. • Do not power off or disconnect the USB cable while updating. • Close all other Brother applications.

  • Page 16: Mac

    Configure Settings Using the Printer Setting Tool Connect the label printer and your computer with the included USB cable. Click Macintosh HD > Applications > Brother > Printer Setting Tool > Printer Setting Tool. Select any of the Settings tabs, and then configure the settings.

  • Page 17: Apply Settings Changes To Multiple Label Printers

    Select the Language, select the check boxes next to the firmware you want to update to, and then click Transfer. Click Start. • Do not power off or disconnect the USB cable while updating. • Close all other Brother applications.

  • Page 18: Appendix

    Put the Head Cleaning Tape Cassette in the label printer, and press the Power Button twice quickly. Approximately 1 in. / 25 mm of tape feeds each cleaning cycle. If the problem is not solved after repeating this process three times, contact Brother customer service. Print Head...

  • Page 19: Clean The Tape Cutter

    Appendix Clean the Tape Cutter Tape adhesive can build up on the cutter blade after repeated use, taking the edge off the blade which may result in the tape jamming in the cutter. Wipe the cutter blades using a cotton swab moistened with ethanol or isopropyl alcohol.

  • Page 20: Troubleshooting

    Appendix Troubleshooting LED Indications Power LED Lit/Flashing Condition • Bluetooth connection established • Feeding or cutting tape • Printing Green Flashing • Receiving data from a mobile device or a computer (0.5 second intervals) • Transferring program Lit for 3 seconds, then off Standby for 1 second Initializing...

  • Page 21: Led Troubleshooting

    • Reconnect the USB cable. • Change the USB port. Cutter error Restart the label printer. Transfer the program again. Program transfer failure If the problem is still not resolved, contact Brother customer service. Flashing  Contact Brother customer service. (0.3 second System error...
  • Page 22 Appendix If you need additional help, visit support.brother.com. Problem Solution • Check that the Tape Cassette is inserted correctly. • If the Tape Cassette is empty, replace it. • Check that the Cassette Cover is securely closed. • Check that the charge is not low.
  • Page 23 The battery may have reached the end of its life. Use a new battery. fully charged. Windows Use the P-touch Update Software to confirm if you have the latest version. See I want to check I am using the Windows: Update Software. latest version of the software. See support.brother.com...

  • Page 24: Product Specifications

    Appendix Product Specifications Dimensions Approximately 5 in. (W) x 2.6 in. (D) x 5 in. (H) Approximately 128 mm (W) x 67 mm (D) x 128 mm (H) Weight (with battery) Approximately 1.4 lb Approximately 640 g Operating temperature 50°F to 95°F 10°C to 35°C Operating humidity 20% to 80% (without condensation)

  • Page 25: Trademarks

    Brother Industries, Ltd. is under license. ® Wi-Fi is a registered trademark of Wi-Fi Alliance Any trade names and product names of companies appearing on Brother products, related documents and any other materials are all trademarks or registered trademarks of those respective companies.

This manual is also suitable for:

P-touch cube

Table of Contents