Charging The Rechargeable Li-Ion Battery; Stopping Rechargeable Li-Ion Battery Charging - Brother PT-P950NW User Manual

Using the Rechargeable Li-ion Battery/Battery Base (Optional:PA-BT-4000LI/PA-BB-002)

Charging the Rechargeable Li-ion Battery

Note
• Before use, fully charge the battery.
• Up to three hours may be needed to fully charge the battery.
a
Make sure the battery is installed in the P-touch Label Printer.
b
Use the AC adapter and power supply cord to connect the P-touch Label Printer to an AC power outlet.
Press the (Power) button to turn on the P-touch Label Printer if it is not on already.
The (Battery) indicator lights in orange during charging, and it goes off when the battery is fully
charged.
1 AC adapter
2 Power supply cord
Note
• Even if the P-touch Label Printer is turned off during charging, the charging will continue until the battery
is fully charged.
• If the P-touch Label Printer is turned on with the rechargeable Li-ion battery installed and the AC adapter
is connected to an AC power outlet, the battery will be recharged. However, when the P-touch Label
Printer is turned on, even after the rechargeable battery has been charged, the battery charge will be used,
leaving the battery with less than a full charge the next time the P-touch Label Printer is used. We
recommend leaving the P-touch Label Printer turned off while charging the battery.
• Although the charging stops if the P-touch Label Printer is used to print, feed, or perform another operation,
the charging will start again automatically after the operation is finished if the charging is not completed.

Stopping Rechargeable Li-ion Battery Charging

To stop the battery charging, disconnect the AC adapter.
1
2
23
23
23
190