Connecting The Power Supply - Brother PT-P950NW User Manual

Setting Up the P-touch Label Printer

Connecting the Power Supply

Use the AD9100ESA (AC adapter) for this P-touch Label Printer. Connect the AC adapter directly to the P-
touch Label Printer.
a
Insert the plug on the AC adapter cord into the AC adapter socket marked DC IN 24 V on the P-touch
Label Printer.
b
Insert the plug on the power supply cord into the AC adapter.
1 AC adapter
2 Power supply cord
c
Insert the power supply plug into a standard AC power outlet.
Important
• Turn off the P-touch Label Printer before disconnecting the AC adapter.
• Do not pull or bend the AC adapter cord and power supply cord.
• After the power supply plug is inserted into the AC power outlet, it may take a few seconds until the
(Power) button is enabled.
Note
To safeguard and back up the P-touch Label Printer memory, when the power supply is unplugged it is
recommended to have the rechargeable battery (optional: PA-BT-4000LI) installed in the P-touch Label
Printer.
1
2
1
1
4