Brother PT-P950NW User Manual page 84

Printing Labels Using P-touch Template
c
Select the transferred template and then click [Transfer] to download the template to the [Key Assign]
number in the P-touch Label Printer.
d
Scan the "P-touch template command (Initialize + begin specifying settings)" barcode.
See List of Barcodes for the P-touch Template Function on page 184.
e
From the list of barcodes under "Basic settings", scan each barcode to send a command or setting to the
P-touch Label Printer.
Note
• Settings can be made with multiple commands.
• If no settings have been made by scanning the barcode commands, a template will be printed using the
P-touch Template settings. The default P-touch Template settings are to print a single copy with "Auto cut"
turned "On".
For more information on P-touch Template Setting Tool, download P-touch Template Manual/Command
Reference (English only) from the Brother Solutions Center at support.brother.com
[Select your region/country.] - [Manuals] - [Choose your product]
• To specify the number of copies you want, scan the "Number of copies" barcode, and then scan the
barcodes under "For entering numbers" to specify a three-digit number. The setting is automatically
applied when three digits have been specified.
Example:
Specify numbers by scanning the following barcodes: 7i[0][0][7], 15i[0][1][5]
• To change the setting for the number of copies, scan the "Number of copies" barcode again, and then scan
the barcodes for the new three-digit number.
f
Scan the "Select template" barcode and then scan the barcodes under "For entering numbers" with the
same number (three digits) as the [Key Assign] number used for the downloaded template to be printed.
The desired downloaded template will be automatically selected after the three digit numbers have been
scanned.
Example:
Specify the three digit numbers by scanning the following barcodes: 7i[0][0][7], 15i[0][1][5]
Note
You can use P-touch Editor to create and print a label with a single barcode for step f.
Example:
6
74