Connecting Using A Wired Lan (Pt-P950Nw Only) - Brother PT-P950NW User Manual

Printing Using the Computer
b
Press the (Wi-Fi) button again to turn the wireless function off. The
Note
When the wireless function is on, the Li-ion battery power will decrease quickly. To change the power
source, connect the AC adapter.

Connecting Using a Wired LAN (PT-P950NW Only)

Note
To use a static IP address to connect your P-touch Label Printer to a wired LAN connection, install the
printer driver and Printer Setting Tool, and then specify wired LAN connection settings with
[Communication Settings] in the Printer Setting Tool.
For more information, see Changing the P-touch Label Printer Settings on page 26.
a
Before connecting the LAN cable, make sure that the P-touch Label Printer is turned off.
b
Connect the LAN cable to the LAN port on the back of the P-touch Label Printer, and then connect the
other end of the LAN cable to an active LAN port on the network.
c
Turn on the P-touch Label Printer.
Note
The printer's communication settings can be changed with [Communication Settings] in the Printer
Setting Tool.
For more information, see Changing the P-touch Label Printer Settings on page 26.
Network Cable
Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast
Ethernet Network.
Note
Connect this product to a LAN connection that is not liable to overvoltages.
(Wi-Fi) indicator turns off.
2
2
2
12