Brother PT-P950NW User Manual page 213

Using the Touch Panel Display (Optional:PA-TDU-003) (PT-P950NW Only)
Key Parameter
(admin
Network
1
key)
(Continue
d)
1
[ ] (admin key) can be accessed only when touch panel A (basic control panel) is set.
Note
• Some settings may differ depending on the firmware (printer software).
• To reset the settings, use [Device settings] in the Printer Setting Tool to return all settings to factory
settings. For more information, see Device Settings for Windows
Setting the Time and Date
Adjust the clock to the current time and date displayed on the main screen.
a
Press [ ] (admin key).
b
Press [b], select [Setup], and then press [OK].
c
Press [b], select [Set Clock], and then press [OK]. The clock setting screen appears.
d
Press the number keys to specify the last two digits of the year, two digits for the month and two digits
for the day.
For December 1, 2016, press [1] [6] [1] [2] [0] [1].
e
Press [a] or [b] to select AM, PM or 24, and then press the number keys to specify two digits each for the
hour and minutes.
To enter 2:45 in the AM/PM format, press [b] to select [PM], and then press [c], then [0] [2] [4] [5].
f
Press [OK]. The main screen appears, and the specified time and date are displayed.
Note
The format for the time and date can be changed: Press [
[Time&Date Form] from the parameters, and then specify settings for [Date Format] and [Time
Format].
LAN IP Address/Subnet
Mask/Gateway
WLAN IP Address/Subnet
Mask/Gateway/
Status/Signal/Channel/
SSID/Comm.
Mode/Infrastructure
Mode
Wdirect Device Name/SSID/IP
Address/Password/Stat
us/Signal/Channel/Wire
lessDirect Mode
Settings
Displays the network settings.
®
on page 44.
] (admin key), select [Setup], then
Description
203
24
24