Table of Contents
Advertisement
Changing the P-touch Labelling Machine Settings
Printer Setting Tool for Mac
Using the "Printer Setting Tool", you can specify the machine's communication settings and device settings
from a Mac. Not only can you change the device settings for one machine, but you can also apply the same
settings to multiple machines.
Note
The "Printer Setting Tool" is installed automatically when you use the initial installer to install the printer
driver. For more information, see Installing the Printer Driver and Software on page 62.
Important
The "Printer Setting Tool" is available only with compatible Brother machines.
Before Using the Printer Setting Tool
Make sure the AC adapter is connected to the machine and to an electrical socket, or a fully-charged
battery is installed.
Make sure the printer driver has been installed correctly and you can print.
Connect this machine to a computer with a USB cable. Settings can be specified only via USB using this
tool.
Using the Printer Setting Tool for Mac
a
Connect the machine you want to configure to the computer.
b
Click [Macintosh HD] - [Applications] - [Brother] - [Printer Setting Tool] - [Printer Setting Tool.app].
The [Printer Setting Tool] window appears.
c
Check that the machine you want to configure appears next to [Printer]. If a different machine appears,
select the machine you want from the drop-down list.
Note
If only one machine is connected, it is unnecessary to make a selection because only that machine will
appear.
d
Select a setting tab, and then specify or change the settings.
e
Click [Apply Settings to the Printer] in the setting tab to apply the settings to the machine.
f
Click [Exit] to finish specifying settings.
Important
Use the Printer Setting Tool to configure the machine only when the machine is in standby. The machine
may malfunction if you try to configure it while it is handling a job.
6
6
6
6
103
Advertisement
Table of Contents
