Table of Contents
Advertisement
Chapter 1
Setting Up the Machine
Connecting the Power Supply
a
Plug the power cord into the power cord
jack on the machine.
b
Plug the power cord into the power
outlet.
c
Press the power button ( ) on the
machine to turn it on. The power
indicator will illuminate green, and the
machine is in standby.
Unbundle the power cord before use.
Installing the Tape Cassette
Install the tape cassette in the machine. The
tape cassette integrates a reel wound with
tape and a reel wound with backing paper.
When printing on fabric ribbon, use the fabric
ribbon cassette.
* The tape cassette is used in the procedures
and illustrations.
a
Open the top cover and bottom cover of
the machine.
Press the open buttons (1) to open the
covers.
14
1
1
b
Make sure that there is no slack in the
tape cassette.
If there is slack in the tape, turn the
reel as shown to remove any slack.
If there is slack in the backing paper,
turn the reel in the direction of the
arrow to remove any slack.
1
1
Advertisement
Table of Contents
