Parts Description; Main Printing Unit; Connecting The Power Supply - Brother QL-570N Setup & Operation Manual

8
STEP1 Getting started

2 Parts Description

Main Printing Unit

Front
DK Roll compartment
cover
Label tray

3 Connecting the Power Supply

Connect the power cord to the
QL-570/580N and then plug the
power cord into a electrical outlet.
Check that the electrical outlet is
•
220V-240V AC before plugging the
power cord.
Unplug the power cord from the
•
electrical outlet after you have finished
using the QL-570/580N.
Do not pull the power cord when
•
unplugging it from the electrical outlet.
The wire in the power cord may
become damaged.
Do not connect the QL-570/580N to
•
the computer until directed to do so
when installing the printer driver.
FEED
CUT LED
ON/OFF
button
button lamp
button
Rear
USB port
LAN port
USB port
The plug may differ by countries.
< QL-570 >
SFSD
Power port
Power cord
< QL-580N >
Power port
Power cord
Serial port