Ricoh SP C340DN User Manual page 85

Message
"Classification Code is
incorrect."
"Collate has been
cancelled."
"Command Error."
"Command Error"
"Compressed Data Error."
"Data storage error."
Cause
The classification code is not
supported by the printer driver.
Collate was canceled.
An RPCS command error
occurred.
An RPCS command error
occurred.
The printer detected corrupt
compressed data.
You tried to print a Sample Print,
Locked Print, Hold Print, or Stored
Print file while the hard disk was
not installed.
When Messages Are Displayed
Solution
Select [Optional] for the
classification code. For details
about how to specify classification
code settings, see "Registering
Classification Codes", Operating
Instructions.
Decrease the number of files sent
to the printer.
Check that the communication
between the digital camera and
the printer is working correctly.
Check that the communication
between a device and the printer
is working correctly.
• Check the connection
between the computer and
the printer.
• Check that the program you
used to compress the data is
functioning correctly.
The hard disk is required when
printing a Sample Print, Locked
Print, Hold Print, or Stored Print.
If the message appear after
installing the hard disk, contact
your service representative.
83