Ricoh SP C340DN User Manual page 79

Message
"Problems with the wireless
board. Please call service."
(A "wireless LAN interface
board" is referred to as a
"wireless board".)
"Output Tray is full. Remove
paper."
"Replacement of Fusing Unit
is now necessary. Please
call service."
"Fusing Unit must be
replaced now. Replace
Fusing Unit."
"Replacement of Fusing Unit
will soon be necessary. A
new unit is required. Please
contact your local vendor."
"Replacement of Transfer
Unit is now necessary.
Replace Transfer Unit."
"Replacement of Transfer
Unit is now necessary.
Replace Transfer Unit."
"Replacement of Transfer
Unit will soon be necessary.
A new unit is required.
Please contact your local
vendor."
"Sensor cleaning required."
Cause
The printer has detected a
wireless LAN interface board
failure.
The output tray is full.
You need to replace the fusing
unit.
You need to replace the fusing
unit.
You will need to replace the
fusing unit soon.
You need to replace the
intermediate transfer unit.
You need to replace the
intermediate transfer unit.
You will need to replace the
intermediate transfer unit soon.
You need to clean the toner
density sensor.
When Messages Are Displayed
Solution
If the message appears again,
contact your service
representative.
Remove the paper.
For details, see "Replacing Other
Consumables", Operating
Instructions.
For details, see "Replacing Other
Consumables", Operating
Instructions.
Contact your sales or service
representative to obtain a new
unit.
For details, see "Replacing Other
Consumables", Operating
Instructions.
For details, see "Replacing Other
Consumables", Operating
Instructions.
Contact your sales or service
representative to obtain a new
unit.
For details, see "Cleaning the
Toner Density Sensor", Operating
Instructions.
77